Felt insulation is used to thermally insulate beehives, for example in winter. Available in size 50 x 50 cm.

Propolis grid/screen Deutsch Normalmaß (German Standard Size). Size approximately 420x377 mm.

Practical crimper with a wooden handle for easy wire tensioning. Proper wire tensioning of a beekeeping frame also requires sufficient wire tension...

Plastic container - bear - 250 g. Made from food grade PET plastic.

Decrystallization chamber is a device designed for liquefying honey. The chamber is equipped with a heating element and fans, and a thermostat ensures protection of honey against overheating. The device can also be used for drying pollen (pollen drawers must be purchased additionally).

OXUVAR® is an approved veterinary medicinal product designed for the treatment of varroasis in honey bees. OXUVAR® has received approval from the State Veterinary Administration of the Czech Republic and is supported by European Union subsidies.

OXUVAR® is an approved veterinary medicinal product designed for the treatment of varroasis in honey bees. OXUVAR® has received approval from the State Veterinary Administration of the Czech Republic and is supported by European Union subsidies.

THYMOVAR® is an approved veterinary medicinal product aimed at treating varroasis in honeybees. This product is approved by the State Veterinary Administration of the Czech Republic.

For 10 Zander frames with dimensions 477 x 110 mm. Without frame runners for direct frame support.

Cardboard box for transporting nucleus colonies on Zander frame size with frame height of 159 mm. The box is made of corrugated cardboard with wax coating.

Cardboard box for transporting nucleus colonies on Langstroth/Dadant frame size up to 3/4 frame height (185 mm). The box is made of corrugated cardboard with wax coating.

Heating cable with temperature regulation with heating power of 700 W. Suitable for heating honey directly in containers, or it can be used to heat an improvised liquefying box (assembled from polystyrene supers, or for example using an old refrigerator). This cable has a length of 8 meters and is suitable for containers up to Ø 65 cm.

Heating cable with temperature regulation with heating power of 350 W. Suitable for heating honey directly in containers, or it can be used to heat an improvised liquefying box (assembled from polystyrene supers, or for example using an old refrigerator). This cable is 8 meters long and is suitable for containers up to Ø 65 cm.

Tall beekeeping smoker made of stainless steel with insert for easy ash emptying. It is equipped with a safety grid to prevent burns, a hook and an eye for hanging. Quality leather bellows.

Tall beekeeping smoker made of stainless steel with an insert for easy ash emptying. It is equipped with a denser safety grid to prevent burns, a hook and an eyelet for hanging. Quality leather bellows.

Large beekeeping smoker made of stainless steel with an insert for easy ash emptying. It is equipped with a denser safety grid to prevent burns, a hook and an eyelet for hanging. Quality leather bellows.

Iodoform disinfectant for sanitation of spaces and equipment for animals

For easier cleaning of soiled beekeeping equipment, honey extraction room, or other agricultural operations. According to regulations, this product can only be sold to professional users. When ordering, please provide your business ID number, otherwise the goods will not be shipped.

Industrial propane-butane burner is designed for large-capacity heating and is ideal for beekeepers, builders, road workers, and farmers. It is also practical for home butchering, feed preparation, and similar activities.

Quality frame packaged after 50 pieces designed for Langstroth frames size 185 - 3/4 Langstroth.

Metal cover for 3 cm hive. Nice metal cover for outdoor use. Metal cover with dimensions 53.5 x 53.5 cm and height 6 cm.

Honey container Mellarius ProLine 25 kg equipped with a sealing lid with tightening band. High-quality stainless steel container for honey storage. Stackable.

Honey container Mellarius ProLine 35 kg equipped with a sealing lid with tightening band. High-quality stainless steel container for honey storage. Stackable.

Honey container Mellarius ProLine 50 kg equipped with a sealing lid with tightening hoop. Quality stainless steel container for honey storage. Stackable.

Creaming device Mellarius for creaming up to 80 kg of honey in one batch. Quality honey creamer manufactured with an integrated timer. Includes legs with lockable wheels.

The insulating chamber partition is designed for insulating bee colonies during spring development, as well as for insulating nucleus colonies or weak bee colonies.

The insulating chamber partition is designed for insulating bee colonies during spring development, as well as for insulating nucleus colonies or weak bee colonies.

The insulating chamber partition is designed for insulating bee colonies during spring development, as well as for insulating nucleus colonies or weak bee colonies.

White honey container with lid for 21 kg of honey. The container volume is 16.5 liters. Plastic honey containers are made from smooth, easily washable plastic.

Yellow honey container with lid for 14 kg of honey. Container volume is 10.7 liters. Plastic honey containers are made from smooth, easy-to-clean plastic.

Yellow honey container with lid for 7 kg of honey. The container volume is 5.6 liters. Plastic honey containers are made of smooth, easy-to-clean plastic.

Yellow honey container with lid for 4 kg of honey. The container volume is 3.1 liters. Plastic honey containers are made from smooth, easily washable plastic.

Stainless steel smoker with wire guard and insert for fuel. Very safe use. You can easy remove ashes.

Tangential honey extractor for three frames (or radial for nine frames) with its own container and strainer. The extractor is firmly connected to the container using clamps. Between the extractor and the container is a large strainer with a diameter of 52 cm. The basket width is 32 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for five frames (or radial for ten frames) with its own container and strainer. The extractor is firmly connected to the container using clamps. Between the extractor and container is a large strainer with a diameter of 52 cm. The basket width is 26 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for four frames with its own container and strainer. The basket width is 29 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for three frames with its own container and strainer. The basket width is 34 cm, so the extractor is suitable for most frames or two shallow supers. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for three frames (or radial for nine frames) with electric motor, with its own container and strainer. The basket width is 32 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for five frames (or radial for ten frames) with electric drive, with its own container and strainer. The basket width is 26 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for four frames with its own container and strainer. The basket width is 29 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for three frames with its own container and strainer. The basket width is 34 cm, so the extractor is suitable for most frames or two shallow supers. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Wooden top feeder for Mini Plus. Firmly glued and stapled. External dimensions approximately 275 x 275 mm. Height 80 mm.

Wooden frame feeder for Mini Plus, as wide as one frame. Firmly nailed and glued. External dimensions approximately 215 x 159 mm. Top bar 251 mm.

Frame with a top bar that is 10 mm wide, Ears narrowed to 8 mm. The width of the top bar is 22 mm. Frames wired with stainless steel wire and equipped with eyelets.

Conical metal cover for Zander/Langstroth hive. Practical and handy metal cover for outdoor use made of galvanized sheet metal. The cover has bent lower edges to prevent the beekeeper from injuring their hands when putting it on and taking it off.

Hive roof in trapezoid shape. Made of galvanized sheet metal with 0.5 mm thickness. The height of the roof side is 6 cm. The roof is folded on the lower edges to prevent injuring the beekeeper's hands when putting on and removing.

Can be used for up to 5 Zander frames - stainless steel rails. Spruce wood with a thickness of 20 mm or Nordic pine. Half-super - Zander Dr. Liebig has external dimensions of 525 mm x 210 mm and a height of 230 mm. Two half-supers together make a complete super.

Cardboard box for transporting nucleus colonies on DN frame size with frame height of 223 mm. The box is made of corrugated cardboard with wax coating.

Cardboard box for transporting nucleus colonies on Zander frame size with frame height of 220 mm. The box is made of corrugated cardboard with wax coating.

Cardboard box for transporting nucleus colonies on Langstroth/Dadant frame size up to Jumbo frame height (285 mm). The box is made of corrugated cardboard with a waxed finish.

Cardboard box for transporting nucleus colonies on frame size 39x24. The box is made of corrugated cardboard with wax coating.

Heating cabinet for melting honey with a volume of up to 90 liters. The mini cabinet is equipped with a heating element and a fan, which allows good heat circulation inside. The cabinet includes a thermostat, which protects against by overheating the honey.

Cover for Zander hive in Liebig variant. Size 564 x 467 mm, height 8 cm.

APIMANA Invert is made from sugar inverted syrup using enzymatic technology. Package includes 4 bottles of 6 kg each.

24 V DC power supply is an ideal solution for powering a frame drilling machine. With this 24 V transformer, the drills reach 10,000 rotations per minute and can drill up to 450 frames per hour.