Quality queen excluder in lot of sizes. Molded, not stamped, leaving no rough edges to harm your bees.

Inner cover with insulation board. This cover is compatible with 10 frame hives like Langstroth, Dadant and Zander.

This hive is suitable for 12 German standard frames in cold configuration with rail. It is made of 20mm thick wood and glued multiple times. The stability is further supported by a rabbet joint at the corner connection.

Made from 100% pure cotton with a quality of 180 g. Black t-shirts with round neckline and print.

This hive is suitable for 10 German standard frames in cold configuration with rail. It is made of 20mm thick wood and glued multiple times. The stability is further supported by a rabbet joint at the corner connection.

For 5 Zande frames (220 mm). With closable entrance hole. Assembled and ready for immediate use. Wood thickness: 20 mm. Wood type: spruce and pine wood.

Divider made of plywood for constricting the DN supers in spring. Optimal for complementing the Segeberger bottom board slider.

This wooden frame can accommodate a Zander queen excluder. The frame is placed between two supers, which makes it easier to put on the super and prevents crushing bees.

The dummy board is used to reduce the width of the hive box. This can be added as a dummy comb.

The divider board is used to separate the super into 2, 3 or 4 compartments. This is used for making splits or queen rearing.

A division board is used to narrow the hive space. The board can be added as a dummy frame.

A divider board is used to divide a hive box into 2, 3, or 4 separate compartments. This is used for making nucleus colonies or queen rearing.

This hive is suitable for 12 German standard frames in cold configuration with rail. It is made of 20mm thick wood and glued multiple times. The stability is further supported by a rabbet joint at the corner connection.

Basic dimensions 520 x 420 mm. Capacity approximately 10 liters (14.00 kg). Wood thickness 20 mm. Wooden parts should be coated with a suitable finish on both the outside and inside. Made of wood.

Honey extraction and settling tank Mellarius MaxiLine series with a capacity of 50 kg of honey with integrated heating element, sloped bottom, quality stainless steel valves and sealing stainless steel roof. Quality and practical extraction tank for 50 kilograms of honey.

Honey extracting and settling tank Mellarius MaxiLine series with a capacity of 35 kg of honey with integrated heating element, sloped bottom, quality stainless steel taps and sealing stainless steel roof. Quality and practical extracting tank for 35 kilograms of honey.

Honey extracting and clarifying tank Mellarius MaxiLine series with a capacity of 25 kg of honey with integrated heating element, sloped bottom, quality stainless steel valves and sealing stainless steel roof. Quality and practical extracting tank for 25 kilograms of honey.

Honey extracting and settling tank Mellarius from the MaxiLine series with a capacity of 50 kg of honey with a sloped bottom, quality stainless steel taps and a sealing stainless steel roof. Quality and practical extracting tank for 50 kilograms of honey.

Honey extracting and clarifying tank Mellarius MaxiLine series with a capacity of 35 kg of honey with a sloped bottom, quality stainless steel taps and a sealing stainless steel roof. Quality and practical extracting tank for 35 kilograms of honey.

Honey extracting and settling tank Mellarius from the MaxiLine series with a capacity of 25 kg of honey with a sloped bottom, quality stainless steel taps and a sealing stainless steel roof. Quality and practical extracting tank for 25 kilograms of honey.

This hive is suitable for 10 German standard frames in cold configuration with rail. It is made of 20mm thick wood and glued multiple times. The stability is further supported by a rabbet joint at the corner connection.

Galvanized wire mesh with diamond-shaped openings. Wire thickness 0.6 mm, openings are in dimensions 3 x 4.8 mm. The roll is sold in a length of 10 m with a width of 42 cm. The expanded metal offers easy handling and cutting. It doesn't twist or unravel.

Nuc corrugated for a queen of hardened polystyrene and plastic. The walnut corrugated roof is polystyrene. Can be added queen or queen cell. Once the queen has begun, it must be removed immediately and add a new queen or queen cell.

Proccesing honey bucket Mellarius for 16 kg of honey, suitable for many activities in the processing of honey. You can put this honey pot under most honey extractors.

Stainless steel stand Mellarius Fill Fix for honey tanks from 25 kg up to 50 kg with automatic tilt function. The stand is equipped with a moving part, which is raised by a spring depending on the amount of honey in the container. This stand is for all honey tanks with diameter 30,5 cm (Mellarius, Logar, H. Holtermann, Swiss Biene and other). Size of support pad is 300 x 280 mm. Total size is 420 x 340 mm, total height 240 mm. Weight approx. 4.5 kg. It is also part of the package anti-slip mat.

This 50 kg honey tank have integrated heater for perfect control and maintenance of honey fluidity. Heater have controler, when you can set output power.

This 35 kg honey tank have integrated heater for perfect control and maintenance of honey fluidity. Heater have controler, when you can set output power.

This 25 kg honey tank have integrated heater for perfect control and maintenance of honey fluidity. Heater have controler, when you can set output power.

German stainless steel honey tank for 50 kg of honey with stainless steel honey gate and sealing stainless steel roof. This honey tank have innovated sloping bottom - all the honey will simply flow out.

German stainless steel honey tank for 35 kg of honey with stainless steel honey gate and sealing stainless steel roof. This honey tank have innovated sloping bottom - all the honey will simply flow out.

German stainless steel honey tank for 25 kg of honey with stainless steel honey gate and sealing stainless steel roof. This honey tank have innovated sloping bottom - all the honey will simply flow out.

Stainless steel ventilation grid in a wooden frame and a removable tray for debris. Insertable cassette, can be used variably from the back, top, or bottom.

Tall fully-screened bottom board with a ventilation grid made of galvanized steel. Closable entrance reducer that prevents mice from entering.

Suitable for hives of Liebig Zander 10 frame and Liebig DNM 12 frame construction. Made of 2 mm thick plastic with an angled cover and aluminum sheet to be placed on the fold of the feeder.

Made from a single piece of plastic with a plastic insert. The feeder is also suitable for Langstroth hives. Capacity 7 liters, weight approx. 1.5 kg. Dimensions approx: 43 x 51 cm, height approx. 6 cm.

It is placed on the frames and prevents the queen from passing between the supers. Size approximately 478 x 378 mm, thickness 3 mm, yellow.

10-frame Liebig DN Compact Hive Propolis Screen

Dimensions: 420 x 377 mm

For placing on the frames, 420 x 377 mm, 3 mm thick

For placing on top of the frames 420 x 377 mm, galvanized

Liebig Zander Propolisgitter

Größe ca. 478 x 378 mm

made of light-colored plastic, stable and boil-proof, gridded with 5 x 5 cm Varroa counting squares, dimensions approx. 420 x 382 mm

Dimensions approx: 460 x 20 mm

Suitable for bottom board: product code 1431. Made of light-colored plastic, UV stable heat-resistant material. With a 5 x 5 cm grid for convenient monitoring of Varroa mites. Dimensions approximately 475 x 380 mm, with the possibility of trimming.

Length approx. 460 mm

Length approximately 376 mm

The set includes a low or high varroadno. One Dadant US extension for 12 frames with a height of 285 for frames with a top of 482 mm with stainless steel rails. It also includes 3 extensions with a height of 159 for 12 frames with a top of 482 and a height of 159 mm with stainless steel rails.

The set includes a low or high varroadno. One Dadant US extension for 12 frames with a height of 285 for frames with a top of 482 mm with stainless steel rails. It also includes 2 extensions with a height of 159 for 12 frames with a top of 482 and a height of 159 mm with stainless steel rails.

The set also includes a honey extension option with a wooden comb, which reduces the honey extractor to 10 or 11 frames.

The set includes low or high varroadno. One Dadant US extension for 12 frames height 285 for frames with upper meadow 482 mm with stainless steel rails. It also includes 3 extensions height 141 for 12 frames with upper meadow 482 and height 141 mm with stainless steel rails.

Made from light-colored plastic, UV stable and heat-resistant material. With a molded grid with 5 x 5 cm cells. Dimensions approximately 435 x 410 mm

Low, fully meshed enclosure with stainless steel ventilation wiremesh. Lockable door to prevent mice from entering.

Practical lid in size 530x530x70 mm for Dadant US 12 frame hives, made of stainless steel sheet type 201.

Stainless steel grafting tool for queen larvae, for the coloring of future queen to queen cell, Metal grafting tool with stainless steel needle.

Circular entrance gate with a diameter of 68 mm. It also serves to close the passage for bees and queen. Option for larger or smaller passage or just as a ventilation hole.

Circular entrance gate with a diameter of 68 mm. It also serves to close the passage for bees and queen. Option for larger or smaller passage or just as a ventilation hole.

Hive box with stainless steel rails - disassembled, for 12 Dadant US frames, low frame extension with dimensions of 482 x 448 x 141 mm.

Through the use of bee escapes between the honey and brood chamber, the intermediate floor can be used as a honey removal board.