German stainless steel honey tank for 50 kg of honey with stainless steel honey gate and sealing stainless steel roof. This honey tank have innovated sloping bottom - all the honey will simply flow out.

German stainless steel honey tank for 35 kg of honey with stainless steel honey gate and sealing stainless steel roof. This honey tank have innovated sloping bottom - all the honey will simply flow out.

German stainless steel honey tank for 25 kg of honey with stainless steel honey gate and sealing stainless steel roof. This honey tank have innovated sloping bottom - all the honey will simply flow out.

Stainless steel ventilation grid in a wooden frame and a removable tray for debris. Insertable cassette, can be used variably from the back, top, or bottom.

Tall fully-screened bottom board with a ventilation grid made of galvanized steel. Closable entrance reducer that prevents mice from entering.

Suitable for hives of Liebig Zander 10 frame and Liebig DNM 12 frame construction. Made of 2 mm thick plastic with an angled cover and aluminum sheet to be placed on the fold of the feeder.

Made from a single piece of plastic with a plastic insert. The feeder is also suitable for Langstroth hives. Capacity 7 liters, weight approx. 1.5 kg. Dimensions approx: 43 x 51 cm, height approx. 6 cm.

It is placed on the frames and prevents the queen from passing between the supers. Size approximately 478 x 378 mm, thickness 3 mm, yellow.

10-frame Liebig DN Compact Hive Propolis Screen

Dimensions: 420 x 377 mm

For placing on the frames, 420 x 377 mm, 3 mm thick

For placing on top of the frames 420 x 377 mm, galvanized

Liebig Zander Propolisgitter

Größe ca. 478 x 378 mm

made of light-colored plastic, stable and boil-proof, gridded with 5 x 5 cm Varroa counting squares, dimensions approx. 420 x 382 mm

Dimensions approx: 460 x 20 mm

Suitable for bottom board: product code 1431. Made of light-colored plastic, UV stable heat-resistant material. With a 5 x 5 cm grid for convenient monitoring of Varroa mites. Dimensions approximately 475 x 380 mm, with the possibility of trimming.

Length approx. 460 mm

Length approximately 376 mm

The set includes a low or high varroadno. One Dadant US extension for 12 frames with a height of 285 for frames with a top of 482 mm with stainless steel rails. It also includes 3 extensions with a height of 159 for 12 frames with a top of 482 and a height of 159 mm with stainless steel rails.

The set includes a low or high varroadno. One Dadant US extension for 12 frames with a height of 285 for frames with a top of 482 mm with stainless steel rails. It also includes 2 extensions with a height of 159 for 12 frames with a top of 482 and a height of 159 mm with stainless steel rails.

The set also includes a honey extension option with a wooden comb, which reduces the honey extractor to 10 or 11 frames.

The set includes low or high varroadno. One Dadant US extension for 12 frames height 285 for frames with upper meadow 482 mm with stainless steel rails. It also includes 3 extensions height 141 for 12 frames with upper meadow 482 and height 141 mm with stainless steel rails.

Made from light-colored plastic, UV stable and heat-resistant material. With a molded grid with 5 x 5 cm cells. Dimensions approximately 435 x 410 mm

Low, fully meshed enclosure with stainless steel ventilation wiremesh. Lockable door to prevent mice from entering.

Practical lid in size 530x530x70 mm for Dadant US 12 frame hives, made of stainless steel sheet type 201.

Stainless steel grafting tool for queen larvae, for the coloring of future queen to queen cell, Metal grafting tool with stainless steel needle.

Circular entrance gate with a diameter of 68 mm. It also serves to close the passage for bees and queen. Option for larger or smaller passage or just as a ventilation hole.

Circular entrance gate with a diameter of 68 mm. It also serves to close the passage for bees and queen. Option for larger or smaller passage or just as a ventilation hole.

Hive box with stainless steel rails - disassembled, for 12 Dadant US frames, low frame extension with dimensions of 482 x 448 x 141 mm.

Through the use of bee escapes between the honey and brood chamber, the intermediate floor can be used as a honey removal board.

Polycarbonate solar melter will make it easier for you to work with frames and molds you want to paint. The melter is intended for easy processing of the beeswax. On a sunny day, we simply remove the melter into a sunny place, turn it towards the sun, and place it under a slight angle so that the wax flows a lot into the cabinet.

Heat-resistant, food-safe and with 5 x 5 cm Varroa counting grid Dimensions approx. 462 x 462 mm

This is complet bee hive Dadant US. Consists of: 1x high proof, 1x hive box for Jumbo Dadant (285 mm) and 1x hive box for 2/3 frames (159 mm), 1x sheet metal roof.

This is complet bee hive Dadant US. Consists of: 1x high proof, 1x hive box for Jumbo Dadant (285 mm) and 2x hive box for 2/3 frames (159 mm), 1x sheet metal roof.

High bottom (openable back cover) for Dadant US in 10 frames variant, means you do not have to disassemble the hive to clean the drawer.

High bottom (openable back cover) for Langstroth in 10 frames variant, means you do not have to disassemble the hive to clean the drawer.

Hive box for beehive Dadant US in size for Jumbo 285 mm frames with milled handle.

Hive box for beehive Dadant US in size for Original 232 mm frames with milled handle.

Hive box for beehive Dadant US in size for 3/4 frames with milled handle.

Hive box for beehive Dadant US in size for 2/3 frames with milled handle.

Dadant US hive roof from stainless steel sheet. Roof is without thermal insulation.

Dadant US hive roof from sheet metal. Roof is without thermal insulation! We can made any size, please contact us.

Fiberboard roof for Langstroth hive in variant for 10 frames. Roof weight 2 kg. Roof size: 51,5 x 42 x 3 cm

Insulation for the hive cover and regulation of temperature and humidity

For insulation in the supers I and II as a winter cover to regulate temperature and hive humidity

Insulation for the hive cover and regulation of temperature and humidity

Insulation for the hive cover and regulation of temperature and humidity

For insulation in the bottom board as a winter cover and regulation of temperature and hive humidity

Stainless steel hive tool with plastic handle. Practical stainless steel hive tool with plastic handle for easy work with bees. The hive tool is suitable for separating...

Stainless steel hive tool with wooden handle. Practical stainless steel hive tool with wooden handle for easy work with bees. The hive tool is suitable for separating...

Universal stainless steel holder for nylon sieves. This holder can be set in three heights - 55 or 57,5 or 60 cm. Diameter for holder is 29,5 cm. Support pad size is 35x35 cm.

Plastic frame feeder feeder for one Zander 223 frame. Rough surface of the inner side.

Plastic frame feeder feeder for Dadant - Langstroth Jumbo 285 mm.

Universal automatic creaming machine Mellarius ProLine 230 V is for use on your own containers.

German device for beehive fumigation. Device working on the principle of blowing smoke into the hive.

German device for beehive fumigation. Device working on the principle of blowing smoke into the hive.

Metal set for solar wax melter improved with a sieve along the entire length of the insert. The melted wax will thus be directly freed from larger impurities.

Wooden anti-building grid. A simple barrier against building into the bottom. If your bee colonies tend to build into the bottom board...