Manual honey extractors

Transparent honey extractor with 4 frames basket for all inquisitive beekeepers. The Honey Extractor is all made of stainless steel and plexiglass, designed for two frames up to a maximum size of 30x46 cm

Transparent honey extractor with 3 frames basket for all inquisitive beekeepers. The Honey Extractor is all made of stainless steel and plexiglass, designed for two frames up to a maximum size of 25x46 cm

Tangential honey extractor, stainless steel, for five frames. Beekeeping honey extractor with manual drive and electric motor. Basket dimensions 27.5 x 45 cm. Honey extractor with container diameter approximately 61 cm...

Tangential honey extractor, Ø600mm, 4-frame, manual and electric drive, CLASSIC LINE.

Quality honey extractor proven German constructions, as you can know from brands such as H. Holtermann, C. Fritz, Logar, Biene Ruck and others. The drum diameter is 54 cm. Honey extractors Swiss Biene use the same handles like these brands and have a number of the same elements.

The 4-frame honey extractor is the basic version of the device used for extracting honey. This version is equipped with an electric drive. The manual controller is simple and intuitive to use – a convenient knob is used to increase / decrease the revolutions.

The 4-frame honey extractor is the basic version of the device used for extracting honey. This version is equipped with an electric drive.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 32x46 cm. Simple crank with gear facilitates spin. The diameter is only 40 cm and the height of the honey extractor is 58 cm.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 25x46 cm. Simple crank with gear facilitates spin. The diameter is only 40 cm and the height of the honey extractor is 58 cm.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 25x46 cm. Simple crank with gear facilitates spin. The diameter is only 40 cm and the height of the honey extractor is 58 cm.

A tangential or radial honey extractor for three or nine frames with manual drive. The width of the basket is 34 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A tangential honey extractor for five or ten frames with manual drive. The width of the basket is 24 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A tangential honey extractor for four frames with manual drive. The width of the basket is 30 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A tangential honey extractor for four frames with manual drive. The width of the basket is 30 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A tangential honey extractor for four frames with manual drive. The width of the basket is 27 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A tangential honey extractor for three frames with manual drive. The width of the basket is 34 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A tangential honey extractor for three frames with manual drive. The width of the basket is 25 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A tangential honey extractor for two frames with manual drive. The width of the basket is 30 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for three frames up to a maximum size of 25x46 cm.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for three frames up to a maximum size of 25x46 cm.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 32x46 cm.

A tangential honey extractor for four frames with manual drive. The width of the basket is 30 cm, so the honey extractor is suitable for most frames. The honey extractor is made of stainless steel sheets, meeting the certificates for contact with food.

Tangential honey extractor for three frames (or radial for nine frames) with its own container and strainer. The extractor is firmly connected to the container using clamps. Between the extractor and the container is a large strainer with a diameter of 52 cm. The basket width is 32 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for five frames (or radial for ten frames) with its own container and strainer. The extractor is firmly connected to the container using clamps. Between the extractor and container is a large strainer with a diameter of 52 cm. The basket width is 26 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for four frames with its own container and strainer. The basket width is 29 cm, so the extractor is suitable for most frames. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

Tangential honey extractor for three frames with its own container and strainer. The basket width is 34 cm, so the extractor is suitable for most frames or two shallow supers. The advantage of this solution is the integrated strainer and container, where in one device you get everything needed for extracting, straining, and collecting honey.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 25x48 cm.

A good stainless steel honey extractor for all "beginner beekeepers" who would like to have their own honey extractor but do not want to spend a lot of money on it. The Honey Extractor is all made of stainless steel, designed for two frames up to a maximum size of 34x48 cm.