Lukopren N Super - 1 kg + catalyst

Universal Silicone Rubber Lukopren N Super

Lukopren N Super for casting candles of common shapes in a two-part mold. This rubber also has the highest flowability and copies even the finest relief.

For less intricate models with one-sided relief, Lukopren N 1522 and N Super can be used to make a one-part mold.
For the production of beeswax foundation, both the firm and harder Lukopren N 1522, as well as the softer and more flexible Lukopren N 5221 have gained popularity.

For casting candles of common shapes in a two-part mold, Lukopren N Super is most commonly used. This rubber also has the highest flowability and copies even the finest relief. For more intricate candle models, it is more suitable to choose more flexible and softer types of rubber such as Lukopren N 5221

Candles of classic composition are made from a mixture of paraffin and stearin, which is dissolved in a water bath. Recently, candles made from beeswax have become popular. The temperature during their casting is approximately 70°C.

Lukopren N Super

Two-component silicone rubber

Polymeric low-viscosity paste with excellent flowability. After mixing with the catalyst, it vulcanizes at normal temperatures into a more brittle silicone rubber with the highest fidelity of impressions.
For making simpler molds with very fine relief, encapsulation in electronics.

Packaging: carton (including catalyst);

Molding and encapsulating silicone rubber with the best flowability Lukopren N Super

production of simpler molds from less intricate models, but with very fine relief for subsequent casting of plaster, wax, soap (candles, medals)
production of casts and impressions for control purposes (defectoscopy)
production of custom pads, suction cups, seals
separation or masking layers
(easily removable due to low adhesion to the substrate)
encapsulation and housing of electronic equipment
(mechanical and weather resistance)

for vulcanization of the rubber, it is necessary to precisely dose
Lukopren Catalyst N

The vulcanizate has very low adhesion to most substrates (can be peeled off), to increase it, it is necessary to use a base primer - Lukopren Primer A or N

When making molds, we recommend separating the model for easier demolding; silicone molds, due to their self-separating properties, are no longer separated when used

the transparent shade is easily colorable using Pigment pastes. The silicone rubber can be simply glued or adhered with one-component sealant Lukopren S
silicone rubber Lukopren N Super - fine detail of the mold

Appearance: translucent rubber casting paste (the shade called transparent is semi-transparent, whitish in thicker layers)
Viscosity 6 - 10 Pa.s
Vulcanizate hardness 30 - 32 °ShA
Vulcanizate elongation 170 - 190 %
Thermal resistance of vulcanizate - 50 to + 180 °C
Recommended dosage of Lukopren Catalyst N 3 - 3.5 weight %