Candles mold FS410

Silicone molds for beeswax candles type - FS410

The silicone mold is used for casting beeswax candles. The molds are made of high-quality silicone that easily withstands the temperature of melted wax. Silicone molds are typically made from one piece that is cut to allow for easy removal of the candle. The cut in the mold also allows for wick insertion. The molds are designed for repeated use.

Silicone molds are suitable for casting wax, soap, plaster, resin, etc.

How to make beeswax candles.

Before first use, or if the mold hasn't been used for a long time, wash it. Silicone oil may be released, which needs to be washed off with soapy water or wiped with a tissue soaked in alcohol.

Remember to secure the wick well. A regular rubber band, which is supplied with the mold, is used to secure the mold. If necessary, use more rubber bands. Round rubber bands are not suitable as they slide down on conical molds. For larger molds, rubber bands are not suitable, and it's better to use string wrapped several times around the mold, or you can use stretch film.

Pour the wax into the molds at a temperature of approximately 100°C. As the wax cools in the mold, its volume shrinks. At the same time, the wax tends to adhere to the edges of the mold as it solidifies. The final shape of the candle is therefore somewhat dependent on the elasticity of the mold material. It may help to pierce the center of the mold during solidification and then fill the hole with more wax.

Sometimes there may be a problem if there are cavities in the mold and it's a very complex mold. Due to wax shrinkage, the volume decreases from these areas. The result is incompletely filled protruding parts. You can solve this problem by first pre-filling these parts with a smaller amount of wax.

¨