6-cassette DEUTSCH NORMAL honey extractor Ø800mm, electric drive, OPTIMA

6-cassette DEUTSCH NORMAL honey extractor Ø800mm, electric drive, OPTIMA

These honey extractors are intended for both stationary and nomadic apiaries. Battery powered (12V) allows the centrifugation of honey everywhere where there is no access to the 230V network. These honey extractors have the possibility of working in manual and automatic mode.
Construction:

The drum is made of acid-proof stainless steel 0H18N9, properly reinforced and stiffened.

Basket made of stainless, acid-resistant rods, equipped with cassettes, the construction of which allows the frames to be protected against breakage of the patches. The cassettes are connected with each other by special guides, which preclude clamping of cassettes and springs, which allow return to the initial position. The basket is additionally mounted in the upper and lower cast.

The safety lock mounted on the lid of the honey extractor stops the honey extractor operation when the lid is opened during centrifugation.

Transparent cover made of metaplex giving the opportunity to observe the spinning process without opening and risking contact with the rotating basket.

As standard, we add special pads to the honey extractors to increase the comfort and safety of bee-keeping. Thanks to them, the vibrations of the honey extractors during honey spin are minimized.

The pads are made of PVC (SOFT) material. Very often spinning frames of different weights due to the different amounts of honey they contain. By using LYSON pads you ensure the highest quality of device optimization.